DPA Microphones 3511ES Stereo Kit w 4011ES Cardioid Mics Supply
Description
The 3511ES Stereo Kit from DPA features two compact 4011ES cardioid microphones with active side cables, which have been factory-matched within ±1 dB for frequency response and sensitivity in the microphone s entire frequency bandwidth. The kit can be used to capture audio for close-up applications such as acoustic guitars, grand pianos, overheads, percussion, wind instruments, vocals, spot-miking symphonies, and more.
The 4011ES cardioid microphone can handle very high sound levels. The flat on-axis frequency response delivers a faithful reproduction of the original sound, and the off-axis response is also smooth. Both mics in the pair of 4011ES cardioids have a linear frequency response, and this offers several set-up options such as ORTF and XY configurations.
The 3511ES kit includes two 4011ES mics, a CXO4000 compact XY ORTF stereo holder, a UA0897 shockmount, an extension for the CXO4000, two foam windscreens, two suspension mounts, two GM1500 gooseneck mounts, two mic clips, and two magnet bases for mic holders. With these accessories, the kit is more flexible and provides further positioning options such as fixing the two 4011ES mics in one mount. The kit can also be used for close-miking and distant mic placement.
The 4011ES Cardiod Microphone with Active Side Cable from DPA is designed for capturing audio. It can be used with vocals, close miking instruments, amplifier cabinets, and similar sources in live sound reinforcement and recording applications. The microphone features a cardioid condenser element for minimizing off-axis noise in spot-miking applications, allowing for use in close-miking scenarios and to minimize bleed from other instruments. The 4011ES is powered by 48V of phantom power and offers a frequency range of 20 Hz to 20 kHz. It is capable of handling high SPLs without distortion and uses an MMP preamp with a 12mm XLR cable. A foam windscreen and SM4000-C suspension mount are included.
Get the sound you want, by having the right microphone mount and the right mics. DPA designs this Compact XY ORTF Stereo Holder for advanced sound reproduction. It brings boom sound, mono compatibility, and convenient compatibility with windscreens. In ORTF stereo, use this holder for close miking pianos, overheads for drum kits, orchestras, and ambient sound recordings.
Â
The holder allows you to arrange mics in both a coincident XY stereo configuration as well as in a near-coincident ORTF combined time and intensity difference stereo configuration. It comes with three common international-standard threads to easily secure the holder shaft to a range of microphone stands. DPAÂ delivers extreme quality; start here.
The DPA Microphone Shock Mount UA0897 is designed for use in environments where vibration levels are unusually high. The shock mount features anti-vibration technology that minimizes movement, but does not affect acoustic quality. This unit is ideally suited for stand-mounted use in the studio or hand-held boom applications. This model comes standard with DDS0731 Rubber Mounts for 19mm microphones. It is also fitted with a thread adapter that accepts three of the most popular international standard threads used on microphone stands.
The DPA Microphones EXY4000 Extension for Compact Stereo Holder is intended for use with compact stereo holders (i.e., the DPA CXY4000 and CXO4000) if rubber suspension is needed.
The DUA0041 from DPA is a foam windscreen for d:dicate microphones with an active cable. It can be used to provide protection against wind and pop noises without attenuating the higher frequencies beyond the tolerance field of the microphone s frequency response. In addition, it protects the mic capsule from moisture.
The DPA Microphones SM4000-C Suspension Mount is designed for compact, reference standard microphones with an MMP-C pre-amplifier. This mount allows the microphone to hang from its cable and then be oriented in any direction desired by bending the holder.
Meant to be mounted in a piano frame (or any other magnetic surface), the DPA GM1500 Gooseneck Mount is a combination of magnet mount gooseneck and shock mount. Both omni-directional and directional microphones that are compact as well as larger fit this line. Based on the Rycote Lyre suspension system, almost any microphone can be used simply by adding another Lyre rubber piece. The shock mount is extremely flexible, the holders can be mounted facing both upside and downside and the poles can be adjusted by pushing them back and forth. The DAO4010 microphone cable using Mogami compact cable and an ultra slim DPA XLR housing will give an excellent visual elegance, adding only a few millimeters further length to the microphone. Most of the connector will be locked and hidden in the microphone itself.
DPA Microphones 4011ES Cardioid Microphone With Active Side Cable Specs
Microphone
Operating Principle
Pressure Gradient
Capsule
Condenser
Diaphragm
0.75 19Â mm
Polar Pattern
Cardioid
Performance
Frequency Range
20 Hz to 20 kHz
Maximum SPL
144 dB SPL
Impedance
100 Ohms
Load Impedance
2 Kilohms
Sensitivity
-40 dB at 1 kHz
Dynamic Range
121 dB
Signal-to-Noise Ratio
76 dB A-Weighted
Equivalent Noise Level
18 dB A-Weighted
25 dB ITU-R 468
THD
< 1%
CMRR
40 dB
Power
Operating Voltage
48 V ± 4 V
Operating Current Consumption
3.5 mA
Physical
Operating Temperature
-40 to 113°F -40 to 45°C
Operating Humidity
90%
Dimensions
ø: 0.75 x L: 1.38 ø: 19 x L: 35 mm
Weight
3.84Â oz 109Â g
Packaging Info
Package Weight
1.4 lb
Box Dimensions (LxWxH)
12 x 7.7 x 3.8
DPA Microphones Compact XY ORTF Stereo Holder Specs
Packaging Info
Package Weight
0.25 lb
Box Dimensions (LxWxH)
7.4 x 4.6 x 2.7
DPA Microphones Microphone Shock Mount UA0897Â Specs
Construction
Not Specified by Manufacturer
Finish
Black
Packaging Info
Package Weight
0.3 lb
Box Dimensions (LxWxH)
7.48 x 4.646 x 2.677
DPA Microphones EXY4000 Extension For Compact Stereo Holder Specs
Diameter
0.75 (19mm)
Construction
Rubber
Packaging Info
Package Weight
0.05 lb
Box Dimensions (LxWxH)
5 x 4 x 1
DPA Microphones DUA0041 Foam Windscreen For D:Dicate Microphones With Active Cable Specs
| Operating Principle | Pressure Gradient | ||||||||||||||||||||||||||||||
| Capsule | Condenser | ||||||||||||||||||||||||||||||
| Diaphragm | 0.75 19Â mm | ||||||||||||||||||||||||||||||
| Polar Pattern | Cardioid | ||||||||||||||||||||||||||||||
| Frequency Range | 20 Hz to 20 kHz | ||||||||||||||||||||||||||||||
| Maximum SPL | 144 dB SPL | ||||||||||||||||||||||||||||||
| Impedance | 100 Ohms | ||||||||||||||||||||||||||||||
| Load Impedance | 2 Kilohms | ||||||||||||||||||||||||||||||
| Sensitivity | -40 dB at 1 kHz | ||||||||||||||||||||||||||||||
| Dynamic Range | 121 dB | ||||||||||||||||||||||||||||||
| Signal-to-Noise Ratio | 76 dB A-Weighted | ||||||||||||||||||||||||||||||
| Equivalent Noise Level | 18 dB A-Weighted 25 dB ITU-R 468 | ||||||||||||||||||||||||||||||
| THD | < 1% | ||||||||||||||||||||||||||||||
| CMRR | 40 dB | ||||||||||||||||||||||||||||||
| Operating Voltage | 48 V ± 4 V | ||||||||||||||||||||||||||||||
| Operating Current Consumption | 3.5 mA | ||||||||||||||||||||||||||||||
| Operating Temperature | -40 to 113°F -40 to 45°C | ||||||||||||||||||||||||||||||
| Operating Humidity | 90% | ||||||||||||||||||||||||||||||
| Dimensions | ø: 0.75 x L: 1.38 ø: 19 x L: 35 mm | ||||||||||||||||||||||||||||||
| Weight | 3.84Â oz 109Â g | ||||||||||||||||||||||||||||||
| Package Weight | 1.4 lb | ||||||||||||||||||||||||||||||
| Box Dimensions (LxWxH) | 12 x 7.7 x 3.8 | ||||||||||||||||||||||||||||||
| Package Weight | 0.25 lb | ||||||||||||||||||||||||||||||
| Box Dimensions (LxWxH) | 7.4 x 4.6 x 2.7 | ||||||||||||||||||||||||||||||
| Construction | Not Specified by Manufacturer
|
| Finish
|
| Black
|
|
|