Description

The VEXO series are compact high performance 2-way active loudspeakers and come in 3 different models, each of them with different sizes and performances meeting the requirements of every application. The low-frequency transducer, which is made out of high-quality materials, is combined with a 1.7” voice coil compression driver, enabling high sound pressure levels and a tight driver response with a rotatable 90° x 70° coverage pattern for a wide range of applications.

Thanks to the unique driver composition, the VEXO115A delivers a clear and natural sound with an RMS power of 500 Watts and a maximum power of 2000 Watt. The frequency response (±3dB) starts from 50Hz up to 20 kHz and the sensitivity (1W 1m) reaches 100dB while a maximum continuous sound pressure level from 127dB can be achieved.

When not in use, the active versions of the VEXO series devices automatically go into an energy-saving standby mode. This means that active versions can also be used in fixed installations, as there is no need to physically shut them down after each use.

The construction of the cabinets is made of 15 mm plywood with a polyurethane coating, making them resistant to any impact. The front side of the cabinet is finished with a powder-coated steel grill with acoustical foam. A recessed carry handle on the rear side makes carrying easy. Positioning and suspension of the speaker are easily achieved by using the standard 35 mm pole adapter on the bottom and the M10 rigging points. Two speaker connectors provide reliable connections with easy link-through to cabinets.

The optional Clever U bracket allows mounting the high power 2-way cabinet both horizontally and vertically. An inclination of -90° to +35° ensures an optimal positioning. The optional MBK bracket even allows mounting the VEXO series to the ceiling which gives the opportunity to install the loudspeaker cleanly in any environment.

By installing the optional ANI44XT Dante™ audio network interface in the active loudspeaker, the VEXO series can be integrated into any Dante enabled AV network and transfer digital audio with any compatible solution on the market.

When the ANI44XT is installed the VEXO series will be compatible with AUDAC Touch™ and TouchLink™. Used for creating virtual zones by linking multiple compatible devices with each other. In AUDAC Touch™ you can select multiple amplifier channels that should react to the user as one zone.

The VEXO115A features the unique WaveDynamics™ innovation. Due to this DSP processor, the audio control and processing technology enable any user to effortless control the most advanced acoustic configurations.

The integrated DSP allows pre-sets for full-range, satellite and custom configurations and can be loaded via the USB slot on the back of the device. The AUDAC Touch™ application allows to equalize and create personalised presets and control the equipped VEXO loudspeakers. When installing the ANI44XT, all personalised presets and settings can be adjusted from anywhere at any time.

• Compatible with AUDAC Touch™
• Compatible with TouchLink™
• Dante™ AES67 expansion port
• Advanced DSP and loudspeaker management
• Powerful sound experience
• High sound pressure levels with tight driver response
• Modern & elegant design
• DuraCoat™ texture paintwork
• Impact resistant
• Horizontal and vertical mounting
• WaveDynamics™ supported

• Technical specifications

  Available models

  VEXO115A B		Black version
  VEXO115A W		White version

  System specifications

  Speaker type				2-way
  Peak power handling				2000 W
  Program power handling				1000 W
  RMS AES power handling				500 W
  Impedance				8 Ω
  Sensitivity (1W 1m)				100 dB
  Sound Pressure (Max. W 1m)				127 dB
  Frequency		Response (± 3 dB)			50 Hz – 20 kHz
  Crossover		Type			Active
  Dispersion		Horizontal			90°
  		Vertical			70°
  Drivers		HF			Compression driver with 1.7 VC and 1 throat
  		LF			15 (3 VC)
  Connectors		Remote control			RJ45
  		Input			2 x Combo XLR 6.3 mm jack
  				3-pin Euro Terminal Block (Pitch – 3.81 mm)
  				3-Pin terminal block (linkthrough)
  				XLR male (linkthrough)
  Inputs				USB port
  				RJ45 (Ethernet)
  Power		Consumption		Standby		3.2 W
  				Idle		22.5 W

  Product Features

  Dimensions			429 x 690 x 450 mm (W x H x D)
  Weight			28.3 kg
  Construction			15 mm high-quality plywood
  Finish		Cabinet finishing		Polyurethane coating
  Front finish			Powder coated steel grill with acoustical foam
  Mounting & handling		Rigging points		10 x M10
  		Stand fitting		35 mm pole adapter on bottom
  		Carry handles		On top
  Accessories		Optional		ANI44XT – Dante™ AES67 audio network interface
  Powerdrive mount			Powerdrive type 100 (127 x 70 mm)
  Colours			Black & White

  Title	Default Title